Maintaining The Product - testo 606-1 Manual De Instrucciones

16 Using the product
> Press
characteristic curve appears.
ã Testing the instrument function:
1 Press
2 Connect sensing electrodes with the contacts of the test
resistor on the top of the protection cap.
Test
-
Test: ok
-
Test: ok
‚Tips and assistance'.
3 Press
ã Changing the display view:
Adjustable views
· Current reading
· Hold: Readings are held.
> Press
ã Switching the instrument off:
> Press

Maintaining the product

â Changing batteries:
1 To open the battery compartment, push the battery cover
down.
2 Remove used batteries and insert new batteries
(2x 1.5 V type AAA). Observe the polarity!
3 To close the battery compartment, push the battery cover
back on.
â Cleaning the housing:
> Clean the housing with a moist cloth (soap suds) if it is dirty.
Do not use aggressive cleaning agents or solvents!
several times until the desired material
several times until
flashes.
lights up: instrument is functioning.
does not light up: test not possible, see chapter
back to measurement menu.
until the desired view appears.
and hold until the display goes out.
Test:
lights up.