Metal Processing; Emission Levels; Technical Data; Intended Use - Festool CARVEX PSC 420 EB Manual De Instrucciones

English
taining lead and some types of wood).
Contact with or inhalation of this dust may
pose a risk for the operating personnel or
persons in the vicinity. Comply with the
safety regulations that apply in your coun­
try.
– Always connect the machine to a dust ex­
tractor when performing work that gener­
ates dust.
Stroboscopic light can cause epileptic
–
seizures. Do not use this machine if you
are susceptible to epileptic seizures.
– Do not look into the stroboscope light.
Looking into the light source can damage
your vision.
– Do not use power supply units or third-
party battery packs to operate cordless
power tools. Do not use third-party charg­
ers to charge the battery packs. The use of
accessories not expressly authorised by the
manufacturer can result in electric shocks
and/or serious accidents.
Only for AS/NZS: The tool shall always be
–
supplied via residual current device with a
rated residual current of 30 mA or less.
2.3

Metal processing

When processing metal, the following
measures must be taken for safety reasons:
– Connect the machine to a suitable dust ex­
tractor.
– Regularly remove dust deposits in the mo­
tor housing.
– Use a saw blade specifically designed for
the cutting of metal.
– Close the chip guard.
Wear protective goggles.
2.4

Emission levels

The levels determined in accordance with
EN 62841 are typically:
Sound pressure level
Sound power level
Uncertainty
4

Technical data

Cordless jigsaw
Motor voltage
Stroke rate
16
Noise generated when working
Risk of damage to hearing
► Use ear protection.
Vibration emission level a
three directions) and uncertainty K measured in
accordance with EN 62841:
Sawing wood
Sawing metal a
Uncertainty
The specified emission levels (vibration, noise)
–
–
–
The emission values may deviate from the
specified values. This is dependent on how
the tool is used and the type of workpiece
being machined.
► The actual load during the entire operating
► Depending on the actual load, suitable pro­
3
Jigsaws are designed for sawing wood and ma­
terials similar to wood. With the special saw
blades offered by Festool, these machines can
also be used for sawing plastic, steel, alumini­
um, non-ferrous metal and ceramic plates.
L = 88 dB(A)
PA
This power tool is suitable for use with
L = 99 dB(A)
BP Festool battery packs of the same voltage
WA
class.
K = 5 dB
CAUTION
PSC 420 EB PSBC 420 EB
a
7.0 m/s
h
8.0 m/s
h
K
1.5 m/s
are used to compare machines.
They are also used for making preliminary
estimates regarding vibration and noise
load during operation.
They represent the primary applications of
the power tool.
CAUTION
cycle must be evaluated.
tective measures must be defined in order
to protect the operator.

Intended use

The user is liable for improper or non-in­
tended use.
PSC 420 EB
1500–3800 rpm 1000–3800 rpm
(vector sum for
h
15.0 m/s
2 2
7.5 m/s
2 2
1.5 m/s
2 2
PSBC 420 EB
10.8–18 V