Orbit WaterMaster 57004 Manual Del Usuario página 9

WTM210728 57004-24 rD.qx
If more than one station is set for manual duration, the controller will acti-
vate only the last station you set.
For example: You set station 2 to
diately set station 6 to
MANUAL ON
activate station 6 for 20 minutes—your last input. [See Figure 15.].
ON
FIGURE 15: Manual Timed Watering
At the completion of the manual watering duration set on the slide switch,
the controller reverts to the automatic mode.
Watering can be turned off at any time by pushing the slide switch to
. (Remember to push the slide switch back from
OFF
you are using this station in the automatic watering schedule.)
Note: If a manual operation is started during an automatic program cycle, the
automatic program cycle will be cancelled.
Semi-Automatic Mode
In addition to the manual modes previously discussed, the controller also lets
you override the programmed watering schedule temporarily without adjust-
ing the water duration slide switches.
By using the semi-automatic mode, you won't need to remember to return
the duration slide switches to their normal positions.
A. All Stations Cycle Once
This can be especially helpful if you happen to experience unusually warm
weather and you want to have all stations activate one time for their normal
duration as set on the slide switches.
To turn on all stations once in sequence (rotary selector in
button once (a blinking
MANUAL
[See Figure 16.]
ON
FIGURE 16: Watering All Stations Once
6/11/01 10:57 AM
for 30 minutes. Then you imme-
MANUAL ON
for 20 minutes. The controller will only
STATION
6
MANUAL
MINS
to a duration if
MANUAL OFF
) press the
AUTO
is displayed), and then press
ALL ENTER
MANUAL
Page 9
The display will show the first station number that is activated and will
count down the minutes assigned to the watering duration slide switch. All
stations will activate once in sequence (except those that are set to the
position) for the durations set on the watering duration slide switches.
AL OFF
Any station set to the
MANUAL OFF
Note: After has been pushed, if
MANUAL
display will return to the time of day.
To interrupt or discontinue this cycle, press the
At the completion of this function, the controller reverts back to your nor-
mal automatic watering plan.
Note: If a manual operation is started during an automatic program cycle, the
automatic program will be cancelled.
(All stations cycle once, A program only.)
MANUAL To activate each station assigned watering durations for the A program
only, press the
MANUAL
stations with assigned watering durations in the A program only. To initiate
this semi-automatic watering, press
(All stations cycle once, B program only.)
To activate each station assigned watering durations for the B program
only, press the
MANUAL
distinct times. This will select only those stations with assigned watering
durations in the B program only. To initiate this semi-automatic watering,
press .
ENTER
(All stations cycle once, AB program only.)
To activate each station assigned watering durations for the AB program
only, press the
MANUAL
distinct times. This will select only those stations with assigned watering
durations in the AB program only. To initiate this semi-automatic watering,
press .
ENTER
Note: After the button has been pushed, if a selection is not made within
MANUAL
60 seconds the display returns to the time of day.
.
To halt or discontinue semi-automatic or manual watering, press the
button once. The controller will revert to your original automatic
watering program.
7
position will not water.
is not pushed within 60 seconds, the
ENTER
button once.
CLEAR
button, followed by the button. This will select
NEXT
.
ENTER
button followed by pressing the
NEXT
button followed by pressing the
NEXT
-
MANU
button two
button three
CLEAR