Insert Batteries; Rain Gauge - TFA 47.3003 Instrucciones De Uso

MONSUN
– Wireless rain gauge
1. Features
• Wireless transmission of outdoor temperature and rainfall quantity (433 MHz), distance
range up to 30 m (free field), with temperature trend indicator
• Rain sensor with alarm
• Indication of total rainfall quantity, of the last hour, the last 24 hours and the last rain
with time and date of recording
• Bar graph indication and history of the last 7 days, weeks and months
• Indoor temperature
• Maximum and minimum temperature
• Programmable temperature alarm
• Clock with date
• Display unit for wall mounting or table standing
• Very simple installation, no cables required
• Ideal for gardening and agricultural purposes and for all those who want to know
more about nature
2. Elements
2.1 Receiver (Display unit) Fig. 1
LCD
A1: Outdoor temperature
A2: Trend indicator
A3: Time
A4: Rain sensor
A5: Bar graph indication rainfall quantity
Buttons
B1: " HISTORY" button
B2: "SET/RAIN" button
B3: " SINCE" button
B4: "IN/OUT TEMP/SEARCH" button
B5: "ALERT" button
B6: "MAX/MIN" button
B7: "RESET" button
Housing
C1: Wall Mount Hole
C2: Battery Compartment
C3: Stand (removable)
2.2. Transmitter Fig. 2
D1: Battery compartment
8
MONSUN
– Wireless rain gauge
3. Getting started

3.1 Insert batteries

• Insert the batteries (3x 1.5V AA) into the battery compartment of the display unit,
observing the correct polarity.
3.2 Setting of clock and calendar
• After batteries were inserted, or when holding "SET" button for 3 seconds, the 24 h
digit begins to flash. Press " " or " " buttons to choose 12 HR or 24 HR system. Using
"SET" button you can switch to setting hours, minutes, seconds, year, month/day
sequence, month, day, mm/inch, °C/°F and rain sensor alarm ON or OFF.
• In "month/day sequence" the two different date displays can be selected: month/date
(American version) or date/month (European version).
3.3 Reception of outdoor transmitter
• Open the battery compartment of the outdoor rain sensor with a screw driver and
insert the batteries (2 x 1.5 V AA), polarity as illustrated.
• The display unit automatically starts scanning the 433 MHz signal to register the rain
sensor unit after setting time. The symbol
successfully. If the reception of outdoor values fails, "- -" appears on the display. If the
reception of outdoor values fails, "- -" appears on the display. Check the batteries and
try it again. Check if there is any source of interference.
• Manual initialization can be helpful. Hold "SEARCH" button on the display unit for 3 seconds.
• After successful installation screw up the battery compartment of transmitter carefully.
4. How to operate
• Important: Buttons will not function while scanning the outdoor transmitter signal.
• During operation, all successful settings will be confirmed by an acoustical signal.
• The instrument will quit the setting mode, if there is no button used within 15 seconds.
• Holding " " or " " buttons, you will enter fast mode.

4.1 Rain gauge

4.1.1 Rain sensor alarm
• When it starts to rain an alarm signal will sound for 2 seconds and the symbol
begins to flash. Press any button to stop the alarm. The display stops flashing 30 minutes
after the rain has finished.
• Set the acoustic rain sensor alarm on or off during setting mode (see 3.2). "AL ON
• appears on the display when alarm sound is activated.
4.1.2 Indication of date
• Press "SET/RAIN" button to show the date.
4.1.3 Indication of rainfall quantity
• Press "SET/RAIN" button again to show the following information:
• Indication of total rainfall quantity since the last reset. Hold "SET/RAIN" button for
3 seconds to clear the recorded reading.
flashes when the signal is received
AL OF".
9