14 Transporting
► If a metal cutting attachment is mounted: Fit the matching
transport guard.
14 Transporting
14.1 Transporting the Trimmer
► Switch off the trimmer, push retaining latch to position
and remove the battery.
► If a metal cutting attachment is mounted: Fit the matching
transport guard.
► Carry the trimmer properly balanced by the shaft with the
cutting attachment behind you.
► Transporting the trimmer in a vehicle: Secure the trimmer
to prevent turnover and movement.
14.2 Transporting the Battery
► Switch off the trimmer and remove the battery.
► Make sure the battery is in a safe condition.
► Observe the following points when packing the battery:
– The packaging must be non-conductive.
– Make sure the battery cannot shift inside the packaging.
► Secure the packaging so that it cannot move.
The battery is subject to the requirements for the transport
of dangerous goods. The battery is classified as UN 3480
(lithium-ion batteries) and has been tested in accordance
with UN Manual of Tests and Criteria, Part III, sub-section
38.3.
For transport regulations see www.stihl.com/safety-data-
sheets
0458-709-9621-A
15 Storing
15.1 Storing the Trimmer
FSA 90
► Switch off the trimmer, push retaining latch to position
and remove the battery.
► If a metal cutting attachment is mounted: Fit the matching
transport guard.
2
1
► Loosen the wing screw (1) and unscrew it until the
handlebar (2) can be rotated.
► Turn the handlebar (2) through 90° and fold it down.
► Tighten down the wing screw (1) firmly.
► Observe the following points when storing the trimmer:
– The trimmer is out of the reach of children.
– The trimmer is clean and dry.
► If you store the trimmer for more than 3 months: Remove
the cutting attachment.
FSA 90 R
► Switch off the trimmer, push retaining latch to position
and remove the battery.
► If a metal cutting attachment is mounted: Fit the matching
transport guard.
► Observe the following points when storing the trimmer:
English
90
61