Super Ego 8870902 Manual De Instrucciones página 16

GB
User's manual
18) Store carefully when the machine is not in use.
Store in a dry place away from children and locked
with a key.
19) For overhaul and repair of the machine, ask an
appointed ROTHENBERGER agent.
Our products comply with corresponding safety
standards. Do not remodel.
Be sure to ask your sales agent or our sales branch
for any repairs.
If repairs are carried out by unskilled or unqualified
personnel, the performance of the unit will be
adversely affected and may result in accident or
injury.
Instructions for using the Portable Groover
1) Use rollers that match the pipe size.
(Refer to Fig. l, 5)
The rollers supplied as standard can only be used
for 2"- 6" steel pipe (Sch 10) and 2"- 3" steel pipe
(Sch 40). They cannot be used for pipes of other
sizes.
Since the appropriate sizes are marked on the
rollers, replace the rollers according to the pipe size.
2) Never touch rotating parts or work pieces.
To prevent injury to hands and fingers, do not touch
rotating rollers and pipes with your hands.
3) Attach the mount base that matches the pipe
threading machine to be used.
If a different type of mount base is attached, it
with not be possible to set it on the pipe threading
machine correctly.
4) The pipe must be set correctly.
To set the pipe, allow it 10 engage the pipe
threading machine in the direction it is rotating and
shift it by 0.5 degree in the correct direction.
If the pipe is shifted in the reverse direction. it will
slip, making grooving impossible.
5) Operate the handle correctly.
When grooving, turn the handle 1/4 to 1/2 of the
speed that the pipe rotates.
If the handle is turned too quickly, the machine may
be damaged.
6) Be sure to install the pipe threading machine and
pipe stand on a stable flat place.
Avoid using the pipe threading machine and pipe
stand in an unstable position or the machine and
pipe may fall over.
7) After completing the groove, be sure to check on
the size of each part with calipers, etc. (Refer to P.
Roll groove processing size table)
16