Cleaning And Maintenance - Bartscher GWH2 Instrucciones De Uso

6. Cleaning and maintenance

CAUTION!
The device is not designed for direct washing with the water jet.
Do not use water stream for cleaning!
Cleaning
o Clean the device periodically in order to keep it ready for work and prolong its
life span.
o Perform the regular cleaning as listed below and follow the warning information :
o Make sure that the gas shut-off valve is closed and the knobs of the cooking
stations are in off positions (●).
o Wait for the unit to cool.
o Steel parts should be cleaned daily with warm water and soap, rinsed with clean
water and thoroughly dried. Do not use any agents containing chlorine (bleaching
agent, hydrochloric acid, etc.) or brushes or spatulas from steel wool, which may
leave steel particles. Such materials may be oxidized and leave rust on the device.
o Clean the burner with warm water and gentle cleaning agent.
o Check if the burner holes are not blocked. When required, use the pillow from
the steel wool to remove the deposits without damaging the ignition device.
o Do not use any acidic food products, like vinegar, salt, lemon, etc., as they
may cause damages.
o Use soft and dry cloth to dry and polish the surfaces after cleaning.
o In case of longer break in operation clean the steel parts with moistened cloth
and cover with vaseline oil. Then cover the device with protective foil and place
in well ventilated room.
Maintenance
o Inspect the device at regular intervals. Contact the vendor for assistance in repairs
and regular maintenance (at least once a year).
o In case of damages or failures contact the vendor or our service department. First use
the failure detection instruction in section 7.
- 54 -