View Of The Front Panel - Drive MQ3200 Manual Del Usuario

Resolution:
4. 1% for SpO
Measurement Accuracy:
5.
70%. ±2 bpm or-,2% (select larger) for Pulse Rate.
Measurement Performance in Weak Filling Condition:
6.
when pulse-filling ratio is 0.4%. SpO
Resistance to surrounding light:
7.
light or indoor natural light and that of darkroom is less than ±1%.
8. It is equipped with a function switch. The Oximeter can be powered off in case no finger is the Oximeter within
5 seconds.
Optical Sensor
9.
Red light (wavelength is 660nm, 6.65mW)
Infrared (wavelength is 880nm, 6.75mW)
5 Accessories
 One lanyard;
 Two batteries (optional);
 One User Manual.
6 Installation

6.1 View of the Front Panel

6.2 Battery
Step 1. Refer to Figure 3. and insert the two
AAA size batteries properly in the right direction.
Step 2. Replace the cover.
Please take care when you insert the batteries for the
improper insertion may damage the device.
, and 1 bpm for Pulse Rate.
2
±2% in stage of 70%-100% Sp0,, and meaningless when stage being smaller than
, error is ±-4%, pulse rate error is ±2 bpm or +2% (select larger).
2
The deviation between the value measured in the condition of man-made
 Carry Pouch
SpO , and pulse rate can be shown correctly
2