Cord Tangling - Polaris 9350 Sport Manual Del Propietário

3
Figure 25. Remove Filter Canister Assembly
7. Push the quick release button on the canister
assembly (4) and pull open the filter assembly
(5), as shown in Figure 26.
Figure 26. Open Filter Canister Assembly
8. Separate the filter canister from the filter
support (6), as shown in Figure 27.
Figure 27. Remove Filter Canister
9. Empty all debris from the filter canister, then
rinse the canister, the filter support, and the
cleaner under water or using a hose, as shown
in Figure 28.
Figure 28. Wash Filter Canister
6.2.

Cord Tangling

Tangling can occur more frequently when operating
the cleaner on the automatic timer 7-Day Programmed
Cycle (9450/P945 and 9550/P955). Spread out the
floating cable over the pool, ensuring there are no
kinks or coils in the cable. Do not leave the cleaner
unattended for prolonged periods.
NOTE: For optimal patterning and reduced tangling, the
floating cable should enter the water near the middle
of the pool length. Only place enough cable in the
water to reach the farthest point in the pool.
Page 17
7