Starrett S7020 Manual De Instrucciones página 107

VARIABLE SPEED (spm):
The Reciprocating Saw has the feature to vary the blade cutting speed,
measured in spm (stroke per minute). According to the pressure on the
Trigger Switch, proportionally greater will be this speed. To decrease the
speed just remove the pressure on the Trigger Switch.
WARNING: USE variable speed feature only for a short period of time. DO
NOT OPERATE the machine continuously at different speeds.
ELETRICAL BRAKE:
To STOP the shaft of the Jig Saw, RELEASE the Trigger Switch and ALLOW it
to come to a complete stop. The Electric Brake will engage and act quickly
and automatically when released the Trigger Switch.
WORK LAMP:
The Work Lamp (LED) is located on the front of the housing above the cutting
tool (fi gure 04).When the Trigger Switch is pressed this Lamp lights. This
provides light on the surface of the workpiece to operation in low light areas.
When removing the pressure on the Trigger Switch the lamp will be turn off.
FIG 04
This can damage the Trigger Switch.
WORK LIGHT
LED
ENGLISH
TOOL LESS
BLADE CLAMP
(FITTING OF BLADE)
S7020 107