Starrett S7020 Manual De Instrucciones página 114

4. When the blade start cutting, LIFT the machine slowly until the Pivot
Shoe fi rmly support on the material being cut.Then, DRIVE the machine
along its cutting line to run the desired cut;
5. After the blade has entered in the material to be cut, continue cutting
along the cutting line marked.
WARNING: To make a plunge cutting easier and safer, USE a wider blade
possible and to install it with the teeth to up as shown in column B.
CAUTION:
CAUTION:
FIG 08
114 S7020
To reduce the risk of explosion, electric shock and
damage to the equipment, ALWAYS CHECK the
work area if there is a pipe hidden gas, electric wires
or water pipes, when making blind or plunge
cutting.
To avoid loss of control and serious injury, CERTIFY that
the blade to reach full speed before touch the part.
A B
ENGLISH