Descargar Imprimir esta página

Starrett S7020 Manual De Instrucciones página 111

Publicidad

Idiomas disponibles

Idiomas disponibles

1.
REMOVE the Battery;
2.
CERTIFY that the material to be cut is clamped fi rmly;
3.
USE the type and size appropriate of blade for the dimensions of the
material to be cut;
4.
ADJUST the Pivot Shoe as needed to make sure that the blade will
cover all extension of the thickness to be cut;
5.
Also, ADJUST the Pivot Shoe as needed to expose not worn teeth blade
and to extend for longer tool life;
6.
Check if there is clearance behind the material to be cut, só that the
blade will not go to touch in another surface;
7.
MARK the cutting line clearly.If the cut is on a metal part, APPLY cutting
coolant liquid on the line;
8.
INSERT the Battery in the machine;
9.
HANDLE the machine by two hands fi rmly. KEEP the hands just in the
isolated area of the handle;
10. PRESS the Safety Button and the Trigger Switch to start the cut. WAIT
the shaft reach the maximum speed (spm) before to start the cut;
11. NEVER FORCE the machine.PUT the Pivot Shoe on the material to be
cut strongly. USE just the constant pressure in the Blade, enough to keep the
cut of the saw blade;
ENGLISH
S7020 111

Publicidad

loading

Productos relacionados para Starrett S7020