Publicidad
Idiomas disponibles
Idiomas disponibles
How to Use
Warning
Turn the Circuit Breaker ON.
Air will blow out automatically when your hands reach
under the air nozzles, and will stop when you remove
your hands.
Proper Use
Hold your hands parallel and reach deep into the drying
space with your fingers straight out and palms facing
down.
Pull your hands back slowly while air is blowing.
The closer your hands are to the air nozzles,
the quicker they dry.
If your hands move too quickly, water may splash in all directions.
Then turn your hands palm side up and reach into the
drying space again, and pull them back again.
Finally knead your hands together.
CleanDry™ (high-speed) will work continuously for 60 seconds and will then stop automatically for energy
saving. For continuous use, remove your hands and then reach into the drying space again.
3
Do not use this unit as hair dryer or for drying any objects
other than hands.
This may cause electric shock, fire, injury or failure.
The following are tips for effective and faster drying.
Sensor
Air nozzles
Wall surface
▼
< Bottom View >
Publicidad
