Toto CLEAN DRY Manual De Instrucciones página 6

Maintain the Filter (Monthly)
When the filter is dirty, there may be inadequate air flow, abnormal noises, or even failure.
Please clean the filter regularly.
Remove the filter case.
Push the tab at the center of the
filter case downward and remove
the filter case.
Remove the filter.
Take the filter out of the filter
case.
Maintain the Drain Tray (Once or Twice a Week)
Pull out the Drain Tray and remove it from the Drain Tray Assembly.
Dispose of water from the tray.
If you find dirt or foreign matter in the tray, rinse it with water.
If the dirt persists, you can use bleach to clean it.
When reinserting the tray, push it in until you hear a "Click".
When water is over the FULL line,
please dispose of it.
Water will overflow when it is over the FULL line
When pulling out the water collection tray,
Clean
be sure to keep it horizontal.
with
Otherwise, water may spill out of the tray.
water
5
Clean the filter.
Wipe the dirt away gently. If the filter is very dirty, use water to clean it.
Wait until it dries completely. If you find persistent scale on it,
you can use dilute neutral detergent, then wait until it drys completely.
Reinsert the filter.
Insert the filter firmly to keep it
from bouncing out of the filter case.
Clean
with
water
Install the filter case.
Reinsert the filter case firmly into
its original position.
When you hear a "Click", it is
securely in place.
② Then pull out
FULL Line
< Front View >
① Lift the drain tray