Initial Operation; Activate / Deactivate Sensowash; Switch Sensowash ® On / Off - DURAVIT SensoWash i Plus Manual De Instrucciones

5. Initial operation

Activate / deactivate SensoWash

Requirement: SensoWash
1
1
2
> Remove side
panel.
SensoWash will start a self-check for about 15 seconds when it is connected to the
®
power supply. During this time, only the power button on the seat unit can work,
all other operations will not work.
Switch SensoWash
SensoWash can be switched on / off via the side control button.
®
1
> Press button
shown to switch
seat on.
must be connected to the main power supply.
®
2
> Press main switch
to activate/deacti-
vate seat unit.
on / off
®
2
> Green LED in-
dicates that the
seat is ready to
use.
®
3
2
t
Tes
Res et
cato r
Indi 1
Trip
> Attach side
panel.
3
> Press button
shown to switch
seat off.
4
> Red LED indi-
cates standby
mode. Seat not
ready to use.
EN
17