Dostmann Electronic ScanTemp 450 Manual De Usuario página 12

GB
→ Press Mode key 4 for scrolling more display function as follows:
The measurement range: -60 .. +500 °C.
→ ScanTemp will automatically shut off if left idle for more than 60 sec,
unless in PRB mode.
Thermocouple probe scan function:
Press the mode key 4 until PRB appears: on the LCD.
Connect the thermocouple with Scan Temp 450's thermocouple socket 5 and put
the probe in or on the target, the temperature will be displayed beside the "PRB"
icon.
→ ScanTemp 450 will automatically shut off if left idle for more than 12 min in
PRB mode.
→ The measurement range: -64 to +1400 °C.
12
5020-0450_BA_ScanTemp450_01.indd 12
Press emissivity key 4 key to adjust the emissivity. The emissivity
can be changed from 0.10 to 1.00.
Press the Meas. key 6 to display the surface temperature.
Keep pressing Mode key 4 for the Maximum (MAX), Minimum
(MIN), Different between MAX and MIN (DIF) and Average (AVG)
readings during the last measurement period.
Press Down key 2 or Up key 3 to change the High Alarm (HAL) or
Lo Alarm (LAL). F. e.: When the reading 27 °C < LAL 27.1 °C, the
Low icon will flash and you will hear a beep sound.
After measure high temp, the probe may remain HOT for a while.
29.06.2018 09:56:28