Dostmann Electronic ScanTemp 450 Manual De Usuario página 9

GB
ScanTemp 450 – Infrared Thermometer
1. Before you start using it
• Please make sure to read the instruction manual carefully.
• Following and respecting the instructions in your manual will prevent damage
to your instrument and loss of your statutory rights arising from defects due to
incorrect use. We shall not be liable for any damage occurring as a result of
non-following of these instructions.
• Likewise, we take no responsibility for any incorrect readings and for any
consequences which may result from them.
• Please take particular note of the safety advice!
• Please keep this instruction manual for future reference.
2. Field of operation and all the benefits
• The ScanTemp 450 infrared thermometer is a non-contact infrared thermometer
with Thermocouple connector. For the infrared part, simply aim the thermometer
at the target and press the measurement button to display the surface
temperature in less than a second. Plug in the specific thermocouple
(not included), ScanTemp 450 may take contact temperature as high as 1400 °C.
• The distance to target diameter ratio (field of view) is 12:1. For accurate reading,
please make sure the target size is smaller than the spot size.
3. Features
• 2 x 1,5 Volt AAA batteries included
• Large LCD screen, with backlight
• Friendly user interface: 3-Key with trigger
• With high-end arithmetic: Max; Min and DIF; AVG mode
• Auto Power Off in 1 minute
• Precision K type thermocouple thermometer inside
5020-0450_BA_ScanTemp450_01.indd 9
9
29.06.2018 09:56:28