Warranty Conditions - Hayward Tiger Shark RC9990CUB Manual Del Usuario

Put the TigerShark back in the water and switch it back on. In order to protect the fragile components,
TigerShark will cut out automatically if it is removed from the water.
TigerShark IS NOT WORKING ANY MORE
Check the socket for the voltage surge switch system to ensure that the power supply is correct.
Check the power of the power supply box per section (see below).
Check the floating cable per section
CHECKING THE POWER SUPPLY BOX
The power supply box is protected by an automatic circuit that interrupts the current. To switch it back on,
move to the "OFF" position and then to the "ON" position.
The power supply box is equipped with an internal circuit. The voltage across terminals 1 and  of the power
supply socket for the cleaner must be 4 V ⎓.
This appliance is not intended for use by persons (including children) with reduced physical, sensory or men-
tal capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction
concerning use of the appliance by a person responsible for their safety.
All electrical connections must be done by a qualified electrician according to local electrical standard.
F NF EN C 15-100
D DIN VDE 0100-70
A ÖVE 8001-4-70
E UNE 0460-7-70 1993, REBT ITC-BT-31 00
IRL Wiring Rules + IS HD 384-7-70
I CEI 64-8/7
LUX 384-7.70 S
NL NEN 1010-7-70
P RSIUEE

Warranty conditions:

All HAYWARD products are covered for manufacturing defects or material defects for a warranty period of 
years as of date of purchases. Any warranty claim should be accompanied by evidence of purchase, indicating
date of purchase. We would therefore advise you to keep your invoice.
The HAYWARD warranty is limited to repair or replacement, as chosen by HAYWARD, of the faulty products,
provided that they have been subjected to normal use, in compliance with the guidelines given in their user guides,
provided that the products have not been altered in any way, and provided that they have been used exclusively
with HAYWARD parts and components. The warranty does not cover damage due to frost and to chemicals.
Any other costs (transport, labour, etc.) are excluded from the warranty.
HAYWARD may not be held liable for any direct or indirect damage resulting from incorrect installation, incorrect
connection, or incorrect operation of a product.
In order to claim on a warranty and in order to request repair or replacement of an article, please ask your dealer.
No equipment returned to our factory will be accepted without our prior written approval.
Wearing parts are not covered by the warranty.
Electric standard/country
GB BS7671:199
EW EVHS-HD 384-7-70
H MSZ 364-70:1994 / MSZ 10-533 1/1990
M MSA HD 384-7-70.S
PL PN-IEC 60364-7-70:1999
CZ CSN 33 000 7-70
SK STN 33 000-7-70
SLO SIST HD 384-7-70.S
TR TS IEC 60364-7-70
14