Fein KS10-38E Manual De Instrucciones página 13

OBJ_BUCH-0000000046-001.book Page 13 Monday, August 1, 2011 1:33 PM
Assembly instructions.
Before mounting or replacing application tools or accessories, pull the power
WARNING
plug. This preventive safety measure rules out the danger of injuries through
accidental starting of the power tool.
Mounting the auxiliary handle
(figure 2).
Depending on the working manner, screw
the auxiliary handle right or left on the power
tool.
Mounting the spark guard (figure 3).
Line up and attach the spark guard.
Press the locking button halfway through and
hold.
Note: The groove in the spark guard and the
guide pin must be in line with each other.
Turn the spark guard to the required working
position and release the locking button.
en
13