Fein KS10-38E Manual De Instrucciones página 15

OBJ_BUCH-0000000046-001.book Page 15 Monday, August 1, 2011 1:33 PM
Adjustments.
Before mounting or replacing application tools or accessories, pull the power
WARNING
plug. This preventive safety measure rules out the danger of injuries through
accidental starting of the power tool.
Adjusting the spark guard (figure 5).
Press the locking button completely through
and hold it in place.
Turn the spark guard to the required working
position.
Release the locking button again.
Check the tight seating of the spark
guard; its position may only be changed
when pressing the locking button.
Adjusting the swivel arm (figure 6).
Release the clamping lever.
Set the swivel arm to the required working
position.
Tighten the clamping lever again.
en
15