Using The Battery Indicator; Connecting The Battery Charger - Waeco PerfectCharge MCP04 Instrucciones De Uso

Using the battery indicator

7: U phase (float)
The battery switches to float charging in the U phase. The battery voltage is
retained at 100 %.
8: Pulse
The battery charge is monitored, and recharged if necessary, in the pulse
phase. This ensures secure winterizing, for example.
7 Using the battery indicator
A
NOTICE!
Make sure you do not reverse the polarity.
 Positive battery terminal: red terminal
 Negative battery terminal: black terminal
Incorrect polarity can damage the battery indicator.
7.1

Connecting the battery charger

➤ Check that the battery is in good condition:
➤ Check the following:
– The battery housing for damage
– The fluid level in the battery
Fill the battery with the medium specified by the manufacturer, if
necessary.
– The pole contacts
Clean off any dirt present.
➤ Connect the power cable for the battery charger to the 230 V AC mains.
➤ When you are using the connection cable with the 12 V plug: Switch the
vehicle ignition on.
36
PerfectCharge MCP04/07
EN