Introduction; International Electrical Symbols - AEMC CA879 Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

These safety warnings are provided to ensure the safety of personnel.
Please read and comply with these precautions:
Do not place the thermometer on or close to objects whose temperature
is >65°C/150°F.
If the thermometer is subjected to strong ambient temperature variations,
wait 20 minutes after stabilization before resuming measurement.
To avoid errors in measurements, do not expose the thermometer to
strong magnetic or electrical fields (induction heating, arc-welding set,
etc.).
Do not aim the beam of the Model CA879 laser's viewfinder at someone's
eyes.
Comply with operating environment conditions.
Keep the lens perfectly clean.

1.1 International Electrical Symbols

Signifies that the instrument is protected by double or reinforced insulation.
This symbol on the instrument indicates a WARNING that the operator must
refer to the user manual for instructions before operating the instrument. In
this manual, the symbol preceding instructions indicates that if the instructions
are not followed, bodily injury, installation/sample and/or product damage may
result.
Risk of electric shock. The voltage at the parts marked with this symbol may be
dangerous.
Laser radiation, do not look at the LASER beam.
LASER power < 1mW.
Wavelength 650nm.
Class II LASER, conforms to IEC 60825 standard (Ed. 1991).
The trash can with a line through it means that in the European Union, the product
must undergo selective disposal for the recycling of electric and electronic
material, in compliance with Directive WEEE 2002/96/EC.
Infrared Thermometer Model CA879
CHAPTER 1

INTRODUCTION

WARNING
3

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido