PRO LIFTS VMB HDT-8 Manual De Instrucciones página 6

2.15 - Cable : Steel DIN 3060. Quality 180
2
Kg/mm twist resistant.
Cable diameter: 6 mm.
2.16 - Adjustable stabilizing feet with rub-
ber non-slip supports.
2.17 - Safety catches to anchor the legs.
2.18 - Antirust protection, primed paint
3. SAFETY PRECAUTIONS.
PRO LIFTS S.L.
with cured polyester dust cover. The tower
can be supplied with natural aluminium
2.19 - Spirit level to adjust the tower ver-
tically.
2.20 - Swivel wheels to transport the lift
when folded.
3.1 - The HDT-8 is a machine designed to elevate loads
upwards in a vertical direction, It should NEVER be
used as a platform to elevate people.
3.2 -
ble level indicator (L) found on the base. Adjust the leg
stabilizers (Q) by turning the handles (H) to level if ne-
cessary. NEVER use wedges or other foreign objects to
balance the lift.
3.3 - The maximum load indicated on the characteristics
label and the instructions manual should not be excee-
ded.
3.4 - This lift should NEVER be used to elevate a load
verify that the load is correctly supported and centred
on the appropriate lift support so that the weight of the
load will only elevate in a vertical direction.
Depósito legal y copyright. Todos los derechos reservados.
ENGLISH
-
6