General Power Tool Safety Warnings - Dolmar AC-3600 Manual De Instrucciones

Vibration
Attachment
BC-AC (as a brushcutter)
BC-AC (as a string trimmer)
HT-CS
HT-CS + SE-CS
PS-CS
PS-CS + SE-CS
PS-CS 1
PS-CS 1 + SE-CS
CH-CS
CH-CS + SE-CS
MC-CS
• The declared vibration emission value has been
measured in accordance with the standard test method
and may be used for comparing one tool with another.
• The declared vibration emission value may also be
used in a preliminary assessment of exposure.
WARNING:
• The vibration emission during actual use of the power
tool can differ from the declared emission value
depending on the ways in which the tool is used.
• Be sure to identify safety measures to protect the
operator that are based on an estimation of exposure in
the actual conditions of use (taking account of all parts
of the operating cycle such as the times when the tool
is switched off and when it is running idle in addition to
the trigger time).
Symbol
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
....................... Take particular care and attention.
.......... Read instruction manual.
...................... Do not expose to moisture.
Cd
............... Only for EU countries
Ni-MH
Li-ion
Do not dispose of electric equipment
or battery pack together with
household waste material!
In observance of European Directive
2002/96/EC on waste electric and
electronic equipment, 2006/66/EC on
batteries and accumulators and
waste batteries and accumulators
and their implementation in
accordance with national laws,
electric equipment and battery pack
that have reached the end of their life
must be collected separately and
returned to an environmentally
compatible recycling facility.
Left handle (Front grip)
Uncertainty K
2
a (m/s )
h 2
(m/s )
2.5 1.5
4.0 1.5
3.5 1.5
3.0 2.0
2.5 1.5
2.5 2.0
2.5 2.0
2.5 2.0
3.5 1.5
2.5 2.0
2.5 1.5
ENG901-1
END018-1
Right handle (Rear grip)
2
a (m/s )
h
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
3.0
2.6
2.5
General Power Tool Safety
Warnings
WARNING Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury.
Save all warnings and
instructions for future reference.
IMPORTANT SAFETY
INSTRUCTIONS
FOR BATTERY CARTRIDGE
1. Before using battery cartridge, read all
instructions and cautionary markings on (1)
battery charger, (2) battery, and (3) product using
battery.
2. Do not disassemble battery cartridge.
3. If operating time has become excessively shorter,
stop operating immediately. It may result in a risk
of overheating, possible burns and even an
explosion.
4. If electrolyte gets into your eyes, rinse them out
with clear water and seek medical attention right
away. It may result in loss of your eyesight.
5. Do not short the battery cartridge:
(1) Do not touch the terminals with any
conductive material.
(2) Avoid storing battery cartridge in a container
with other metal objects such as nails, coins,
etc.
(3) Do not expose battery cartridge to water or
rain.
A battery short can cause a large current flow,
overheating, possible burns and even a
breakdown.
6. Do not store the tool and battery cartridge in
locations where the temperature may reach or
exceed 50°C (122°F).
Applicable
Uncertainty K
standard
2
(m/s )
1.5 EN11806
1.5 EN786
1.5 ISO10517
2.0 ISO10517
1.5 ISO11680
2.0 ISO11680
2.0 ISO11680
2.0 ISO11680
1.5 ISO10517
2.0 ISO10517
1.5 EN709
GEA010-1
ENC007-7
5