Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
www.trapp.com.br
Congratulations!
You have just acquired a quality product developed with TRAPP's state-of-the-art
technology. This product was designed to work quickly and efficiently, providing
total safety at low cost. However, some care is necessary. The important safety
measures stated in this Instructions Manual do not cover all possible situations that
may occur during usage. The operator will understand that common sense, attention
and care are factors that can not be incorporated in the product, but that have to be
supplied by the people that handle the product and that maintain it.
Attention!
Read all the instructions in this manual before
operating the equipment. Always observe and
follow the safety indications to prevent accidents
and/or injuries.
Read and keep these instructions
When using the grass mower always follow basic
safety precautions to reduce the risk of fire and
accidents, including those described below:
1 - Working area
This product is not intended to be used by persons
(including children) with reduced physical, sensorial
or mental capacity or by those lacking experience
and knowledge.
Children should be watched to make sure they do
not play with the product.
Keep people, specially children and pets, away
from the operation area.
Never leave the engine running in closed rooms
or non-ventilated places. The exhaust gas contains
carbon monoxide, a lethal and inodorous gas.
Do not cut the grass when people, especially
children, or pets are around.
Important Recommendations
If you need maintenance and spare parts, get in
touch with you local distributor or an authorized
technical assistant:
In case of further difficulties, get in touch with:
METALÚRGICA TRAPP LTDA.
Av. Pref. Waldemar Grubba, 4545 - Cx.P. 106
89256-502 Jaraguá do Sul - SC - Brasil
Phone: +55 47 3371-0088 / +55 47 2107-8800
Fax: +55 47 3371-1997
e-mail: trapp@trapp.com.br
Objects thrown by the grass mower - May cause
serious injuries to people and animals. Inspect the
area where the equipment will be used for debris
and remove all stones, pieces of wood, wires, bones
and other weird objects.
Note:
Be especially careful in places with tree roots
exposed in order to not damage the machine
cutting set.
43
Publicidad
Tabla de contenido
