Product Specifications - Kinetico Water Systems PREMIER Serie Manual Del Usuario

Product Specifications

Model
Certified flow rate
@ 15 psi (or less)
Peak flow rate @
30 psi (or less)***
Resin per tank,
in cubic feet
Resin per tank, in liters
Capacity per cycle,
in grains @ salt used
per cycle setting
pounds
Capacity per cycle,
in grams @ salt used
per cycle setting
kilograms
Grains exchanged
per pound of salt used
Grains exchanged per
kilograms of salt used
Max. flow rate to drain
during regenerations
Min./Max. operating
pressure
Min./Max. operating
temperature
Max. working
pressure in psi
* Meets California efficiency requirements of 4000 grains exchanged per pound of salt used. Efficiency is only
certified at the low salt dosage and was determined in accordance with NSF/ANSI 44.
** Two (2) Tanks
*** Peak flow rates are not the maximum service flow rate used to determine rated capacities and efficiency - continuous
operation at flow rates greater than the max service flow may affect capacity and efficiency performance.
Sodium Information: Systems using sodium chloride for regeneration will add sodium to the water. The
amount of sodium added is proportionate to the amount of hardness removed. People who are on sodium-
restricted diets should consider the added sodium as part of their overall sodium intake.
Inlet Hardness
171 mg/L (10 gr)
342 mg/L (20 gr)
513 mg/L (30 gr)
1192 mg/L (40 gr)
18
S150 S250
9 gpm 11.6 gpm
34.1 Lpm 43.9 Lpm
16.5 gpm 18 gpm
62.5 Lpm 68.1 Lpm
0.47 0.7
13.3 19.8
7491 @ 1.8* 11,792 @ 2.7*
9600 @ 2.7 14,196 @ 4.0
486 @ 0.81* 766 @ 1.23*
624 @ 1.2 922 @ 1.8
4161* @ 1.8* 4368* @ 2.7*
3556 @ 2.7 3549 @ 4.0
9248 @ 0.81* 9586 @ 1.23*
8000 @ 1.2 7886 @ 1.8
1.7 gpm 2.2 gpm
6.4 Lpm 8.3 Lpm
103.4 - 861.9 kPa
15 - 125 psi
2 - 49°C
35 - 120°F
861.9 kPa
125 psi
Sodium Added
79 mg/L
149 mg/L
223 mg/L
298 mg/L
S250 OD S350
20.5 gpm 11.2 gpm
77.6 Lpm 45.4 Lpm
30 gpm 19 gpm
113.5 Lpm 71.9 Lpm
0.7 1.5
19.8 42.5
11,792 @ 2.7* 24,626 @ 5.5*
14,196 @ 4.0 38,308 @ 10.0*
766 @ 1.23* 1600 @ 2.5*
922 @ 1.8 2490 @ 4.5*
4368* @ 2.7* 4477* @ 5.5*
3549 @ 4.0 3830 @ 10.0
9586 @ 1.29* 9850 @ 2.5*
7886 @ 1.8 8512 @ 4.5*
2.2 gpm 3.5 gpm
8.3 Lpm 13.2 Lpm