Safety and installation instructions
2
Safety and installation instructions
Please observe the prescribed safety instructions and stipulations from the
vehicle manufacturer and service workshops.
The manufacturer accepts no liability for damage in the following cases:
• Damage to the product resulting from mechanical influences
• Alterations to the product without express permission from the manufacturer
• Use for purposes other than those described in the operating manual
!
WARNING! Beware of injury
Disconnect the vehicle power supply before you begin and make sure it
cannot be restarted.
I
NOTE
If you do not have sufficient technical knowledge for installing
components in vehicles, you should have a specialist install the inner
frame in your vehicle.
Please note the following:
• If faults or disturbances occur, consult a specialist workshop immediately.
• Risk of breakage! Do not tread on the glass dome.
• Keep the roof light free of snow and ice.
• The electrical connections should only be performed by an electrician.
• Replace the defective lights using ones of the same type which have the same
technical data (12 V, 5 W).
3
Scope of delivery
No. in
Quantity Description
fig. 1
1
10
2
4
3
16
4
1
4
Ventilation grille
Lamp covers
Fastening bolt ∅ 2.5 x 12 mm
Inner frame
Heki Accessory
EN