Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
OBJ_BUCH-647-001.book Page 16 Tuesday, January 29, 2008 3:59 PM
16 | English
Hold the power tool only by the insulated
gripping surfaces when performing an oper-
ation where the cutting tool may contact hid-
den wiring or its own cord. Contact with a
"live" wire will also make exposed metal parts
of the power tool "live" and shock the opera-
tor.
When working with the machine, always
hold it firmly with both hands and provide
for a secure stance. The power tool is guided
more secure with both hands.
Secure the workpiece. A workpiece clamped
with clamping devices or in a vice is held more
secure than by hand.
Keep your workplace clean. Blends of mate-
rials are particularly dangerous. Dust from
light alloys can burn or explode.
Always wait until the machine has come to a
complete stop before placing it down. The
tool insert can jam and lead to loss of control
over the power tool.
Never use the machine with a damaged ca-
ble. Do not touch the damaged cable and pull
the mains plug when the cable is damaged
while working. Damaged cables increase the
risk of an electric shock.
Functional Description
Read all safety warnings and all in-
structions. Failure to follow the
warnings and instructions may result
in electric shock, fire and/or serious
injury.
While reading the operating instructions, unfold
the graphics page for the machine and leave it
open.
Intended Use
The machine is intended for sawing wood, plas-
tic, metal and building materials while resting
firmly on the workpiece. It is suitable for straight
and curved cuts. When using the appropriate bi-
metal saw blades, it is possible to cut flush to the
workpiece surface. The saw blade recommenda-
tions must be observed.
1 609 929 N65 | (29.1.08)
Product Features
The numbering of the product features refers to
the illustration of the machine on the graphics
page.
1 Saw blade*
2 Adjustable footplate
3 Slider for SDS saw blade release
4 Thumbwheel for stroke rate preselection
5 On/Off switch
6 Lock-on button for On/Off switch
7 Rotary switch for orbital action
*The accessories illustrated or described are not in-
cluded as standard delivery.
Technical Data
Sabre saw
Article number
Rated power input
Output power
Stroke rate at no load n
0
Tool holder
Stroke rate control
Orbital action
Stroke
Cutting capacity, max.
– in wood
– in non-alloy steel
– Pipe diameter
Weight according to
EPTA-Procedure
01/2003
Protection class
The values given are valid for nominal voltages [U] of
230/240 V. For lower voltage and models for specific
countries, these values can vary.
Please observe the article number on the type plate of
your machine. The trade names of the individual ma-
chines may vary.
GSA 800 PE
Professional
0 601 641 7..
W
800
W
495
500 – 2600
spm
SDS
mm
28
mm
250
mm
20
mm
130
kg
3.4
/ II
Bosch Power Tools
Publicidad
Tabla de contenido
