Joie i-Venture Manual De Instrucciones página 10

5. Place the child into the i-Venture
and pass both arms through
the harnesses.
18
!
The shoulder harnesses height
must be even or slightly lower than
the child's shoulder.
19
!
After the child is seated, re-check
whether the shoulder harnesses
are at the proper height.
6. Engage the buckle.
20
20
17
18
19
7. Pull down the adjustment webbing
and adjust it to the proper length
to make sure your child is snugly
secured. 21
!
Always keep child secured in
harness and properly tightened
by removing any slack.
!
To remove the i-Venture seat off
the base, press and hold the
enhanced child restraint seat
release button on the base then
lift the seat off from the base.
Please ensure the child is not in
the seat first.
22
Forward Facing Mode
Forward Facing Child height 76cm-105cm/Child weight 18.5kg;
Recline position Position 1-7
!
Please install the i-Venture and base on the vehicle seat, and then
put the child in the i-Venture seat.
!
Ensure the rebound bar is removed.
!
The easiest to install i-Venture seat to the base is when the base is in
the 7th recline position.
21
22
2
1
23
18