Securing Your Child - Joie i-Venture Manual De Instrucciones

Ensure the enhanced child restraint
latched indicator on the base show
green so that i-Venture seat is
securely installed onto the base; if it
shows red that means the i-Venture is
incorrectly installed. -1
13

Securing your Child

1. Press the webbing adjustment
button, while pulling out the
shoulder harnesses to the proper
length.
14
-1 Adjustment webbing
14
2. Press the red button to disengage
the buckle.
15
15
13
1
14
1
15
3. Fix the buckles on the both sides of
the seat located on the both sides
of seat as shown to make placing
the child in rear facing mode more
convenient.
16
4. Please make sure the infant insert
has the wedge assembled before
using it for infant.
17
Detach the snaps on
the head support to
remove the head
portion of the insert.
We recommend using the full
infant insert while the baby
is under 60 cm or until they
outgrow the insert. The infant
insert increases side impact
protection.
16
17
Remove the head support
portion of the infant
insert when the child's
head no longer fits
comfortably.
Remove the body
portion of the infant
insert when the infant's
shoulders no longer fit
comfortably.
1 Remove the infant insert
cushion by detaching the
snaps to allow more space
when the infant does not
fit comfortably. The cushion
can be used separately
2
without being attached to
the insert to bolster the
infant's back for more
comfort.
16