Explanation Of General View - Dolmar AT-1016 Manual De Instrucciones

ENGLISH (Original Instructions)
1. Battery cartridge
2. Button
3. Lock-off button
4. Switch trigger
5. Indication lamp
6. Change lever
7. Protrusion on base frame
8. Base frame
9. Shear blades
10. Blade cover
11. Groove
12. Undercover
13. Locking lever
14. Press
15. Turn
16. Shear blade
SPECIFICATIONS
Effective cutting width
Stroke per minute (min
Dimensions (L x W x H)
Rated voltage
Battery cartridge
Battery charger
• Due to our continuing program of research and development, the specifications herein are subject to change without
notice.
• Specifications and battery cartridge may differ from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003
Symbols
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
.................. Take particular care and attention.
....... Read instruction manual.
.................. Danger; be aware of thrown objects.
.................. Keep bystanders away.
.................. Cutting means continues to run after
the motor is switched off.
.................. Do not expose to moisture.
Cd
............ Only for EU countries
Ni-MH
Li-ion
Do not dispose of electric equipment or
battery pack together with household
waste material!
In observance of the European
Directives, on Waste Electric and
Electronic Equipment and Batteries

Explanation of general view

17. Crank
18. Basic alignment line on the tool
housing
19. Pins
20. Recessed part of crank
21. Apply grease
22. Base plate
23. Hole in the base plate of shear
blades
24. Oval holes that are overlapped
25. Groove in the undercover
26. Brush
27. Machine oil
28. Hedge shear blade
29. Hedge shear blade cover
30. Storage case
Model
-1
)
Net weight
END010-4
Intended use
The tool is intended for cutting lawn edges or sprouts.
CORDLESS GRASS SHEAR
SAFETY WARNINGS
WARNING! IMPORTANT READ CAREFULLY all
safety warnings and all instructions BEFORE USE.
Failure to follow the warnings and instructions may result
in electric shock, fire and/or serious injury.
Save all warnings and
instructions for future reference.
31. Bent part of the base plate of
shear blades
32. Screws
33. Grass shear blade cover
34. Grass shear blade
35. Trimming direction
36. Tilt the blades
37. Hedge surface to be trimmed
38. String
39. Clamping nuts
40. Chip receiver
41. Screws on the shear blades
42. Blade cover to be always installed
before installing the chip receiver
43. Hook hole
AT-1016
160 mm
1,250
292 mm x 178 mm x 130 mm
1.1 kg
D.C. 10.8 V
AP-108/BL1013
LG-108/DC10WA
and Accumulators and Waste Batteries
and Accumulators and their
implementation in accordance with
national laws, electric equipment and
batteries and battery pack(s) that have
reached the end of their life must be
collected separately and returned to an
environmentally compatible recycling
facility.
ENE015-1
GEB070-4
9