Explanation Of General View - Dolmar AX-1820 Manual De Instrucciones

ENGLISH (Original instructions)
1. Red indicator
2. Button
3. Battery cartridge
4. Lock-off button
5. Switch trigger
6. Indication lamp
7. Change lever
8. Protrusion on base frame
9. Base frame
10. Shear blades
11. Blade cover
12. Blade frame
13. Groove
14. Locking lever
15. Undercover
16. Press
17. Turn
SPECIFICATIONS
Effective cutting width
Stroke per minute (min
Dimensions (L x W x H)
Battery cartridge
Rated voltage
Battery charger
(Optional accessory)
Blade length of optional hedge shear blades
• Due to our continuing program of research and development, the specifications herein are subject to change without
notice.
• Specifications and battery cartridge may differ from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003
Symbols
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
.................... Take particular care and attention.
....... Read instruction manual.
................... Danger; be aware of thrown objects.
.................. Keep bystanders away.
................... Cutting means continues to run after
the motor is switched off.
................... Do not expose to moisture.
Cd
............ Only for EU countries
Ni-MH
Li-ion
Do not dispose of electric equipment or
battery pack together with household
waste material!

Explanation of general view

18. Shear blade
19. Crank
20. Basic alignment line on the tool
housing
21. Pins
22. Recessed part of crank
23. Apply grease
24. Base plate
25. Hole in the base plate of shear
blades
26. Oval holes that are overlapped
27. Groove in the undercover
28. Brush
29. Machine oil
30. Hedge shear blade
31. Hedge shear blade cover
32. Storage case
Model
-1
)
Net weight
END010-2
Intended use
The tool is intended for cutting lawn edges or sprouts.
CORDLESS GRASS SHEAR
SAFETY WARNINGS
WARNING! IMPORTANT READ CAREFULLY all
safety warnings and all instructions BEFORE USE.
Failure to follow the warnings and instructions may result
in electric shock, fire and/or serious injury.
33. Bent part of the base plate of
shear blades
34. Screws
35. Grass shear blade cover
36. Grass shear blade
37. Trimming direction
38. Tilt the blades
39. Hedge surface to be trimmed
40. String
41. Clamping nuts
42. Chip receiver
43. Screws on the shear blades
44. Blade cover to be always installed
before installing the chip receiver
45. Hook hole
AX-1820
160 mm
1,250
343 mm x 176 mm x 130 mm
AP-18
1.4 kg
D.C. 18 V
LG-18
200 mm
In observance of European Directive
2002/96/EC on waste electric and
electronic equipment, 2006/66/EC on
batteries and accumulators and waste
batteries and accumulators and their
implementation in accordance with
national laws, electric equipment and
battery pack that have reached the end
of their life must be collected separately
and returned to an environmentally
compatible recycling facility.
ENE015-1
GEB070-2
9