Technical Data; Intended Use; Scope Of Delivery - Festool UG-KAPEX KS120 Instrucciones De Montaje

1 Symbols
Symbol Significance
Warning of general danger
Read operating instructions and safety
notices!
Disconnect from the power supply!
CAUTION! Risk of injury to fingers.
The illustrations specified are located at the begin-
ning and end of the operating manual.
3

Technical data

Base frame
Length of base frame without trimming attachment
Length of base frame with trimming attachment on one side
Length of base frame with trimming attachment on both sides
Working height
Max. load UG-KAPEX/KA-UG
Weight of UG-KAPEX without compound mitre saw
Weight of KA-UG
4

Intended use

The base frame UG-KAPEX KS 120 was designed
specifically for use with Festool compound mitre
saws KS 120 EB and KS 88 E.
The trimming attachment KA-UG-KS120 was de-
signed specifically for fitting to the base frame UG-
KAPEX KS 120.
The base frame was designed for sawing boards
and profiles in combination with a power tool.
WARNING
The user will be liable for damage due to improp-
er use.
5 Safety instructions
WARNING!
Read all safety warnings, in-
structions, illustrations and specifications provid-
ed with this tool. Failure to follow all instructions
2

Scope of delivery

Base frameUG-KAPEX KS 120
2 x retaining rails
[1-1]
[1-2] 1 x base frame with rollers (two-part)
1 x folding/fixed stirrup, handle
[1-3]
4 x M6x60 screws
4 x M6 nuts
4 x screws M6x16
4 x D6.4 plain washers
1 x Allen key
Trimming attachment KA-UG-KS120
Left trimming attachment KA-UG-KS120-
[1-4]
L
[1-5] Right trimming
KS120-R
1 x Allen key
1760 - 2680 mm (5' 25/32" - 8' 51/64")
2960 - 4810 mm (9' 23/32" - 15' 25/32")
listed below may result in electric shock, fire and/
or serious injury.
Save all warnings and instructions for future ref-
erence.
– Remove the plug from the socket before adjust-
ing the machine settings or changing accessory
parts.Some accidents are caused by power tools
starting accidentally.
– Set up the base frame correctly before attach-
ing the power tool. Set up the base frame cor-
rectly to prevent the frame from collapsing.
– Secure the power tool safely on the base frame
before using it.If the power tool slips on the base
frame, you may lose control of the machine.
– Place the base frame on a solid, even and hori-
zontal surface. If the base frame can slip or wob-
ble, guiding the power tool or workpiece evenly
and accurately will not be possible.
– Do not overload the base frame and never use it
as a ladder or trestle. Overloading or standing on
UG-KAPEX KS 120
GB
attachment KA-UG-
UG-KAPEX KS 120
560 mm (15-3/4")
900 mm (35-7/16")
100/20 kg (220/44 lbs.)
10,1 kg (22.27 lbs.)
4,6 kg (10.14 lbs.)
9