Switching On The Refrigerator; Setting The Temperature; Setting The Fast Cooling Function - Dometic CRX 1065D Instrucciones De Montaje Y De Uso

Using the refrigerator
• Avoid unnecessarily low temperature settings.
• Clean dust and dirt from the condenser at regular intervals.
8.2

Switching on the refrigerator

I
NOTE
Start the refrigerator only if you are using a battery monitor or if the
alternator in your vehicle provides sufficient voltage.
➤ Switch the refrigerator on by pressing the
I
NOTE
8
After switching on, the refrigerator needs some time before the
compressor starts up.
8.3

Setting the temperature

➤ Press the
button repeatedly until the desired temperature level is set.
The more LEDs light up above the button the lower is the temperature level.
To switch from the last level to the first level press the
I
NOTE
The cooling performance can be affected by:
• The ambient temperature
• The amount of food to be conserved
• The frequency with which the drawer is opened.
If the ambient temperature is at 16 °C to 20 °C, set the refrigerator to at
least level 2.
8.4

Setting the fast cooling function

A
NOTICE! Damage hazard
• Only use the fast-cooling function when the removable freezer
compartment is not being used. Otherwise there is a risk that the
freezer compartment becomes too cold and condensate cannot be
prevented from forming on the outside of the refrigerator. The
energy consumption will also increase dramatically.
• Note that bottles and other containers can burst when frozen.
• Note that it is difficult to open the refrigerator directly after closing it.
22
button.
button again.
CRX
EN