A. FILTER: When it blinking, turn off the power and replace the filter. Long press the reset key to rework.
B. NORMAL MODE/REGULAR INTERVALS MODE: In normal mode, the indicator light is white. In regular intervals mode, the
indicator light is blue. When the fountain is water shortage, it will blinking to remind you add water.
C. RADAR MODE: in radar mode, the indicator light is white. When the fountain is water shortage, it will blinking to remind you
add water.
D. NIGHT LIGHT/RESET: Press the button to turn on the night light. After replace the filter, press the reset button for 2 seconds
to stop blinking.
E. SWITCH ON/OFF: Short press to turn on and change operating mode. Long press to turn off.
Normal
Regular intervals
Radar
Indicator Light Instruction
Operating Modes
Keep working up to 24 hours.
Work for 2 minutes and rest for 3
minutes each cycle.
It will work for 90 seconds when pet
enters the sensor area and stop for
15 seconds. If pet come to the sensor
area, it will work again.
Filter Replace Time
30 days
75 days
30 days
12