Installation Requirements; Installation Preparation - Lucci fini 210012 Manual De Instrucciones

Installation Instructions
Thank you for purchasing this quality Lucci product. To ensure correct function and safety, please read and follow all
instructions carefully before using the product. Please keep instructions for future reference.

Installation requirements


Must be installed by a licensed electrician and in accordance to AS/NZS3000 (the latest edition).

Do not exceed rated power input specification.

This product is suitable for indoor use only.

This ceiling fan remote control is only suitable for controlling the fan motor and the light kit associated with the
ceiling fan. Any other use would be considered as misuse and warranty would be void.

Do not install fan remote control with existing fan wall controller. Remove existing wall controller and replace
with a double pole wall switch, to power the fan remote controller.

Do not use a solid state dimmer with this ceiling fan remote controller.
This remote control is designed to control your ceiling fan speed and light.

Installation preparation

Before carrying out the installation, the following must be considered.
-
2 x AAA 1.5V (size) batteries are required to operate the remote control. Remove the battery cover from
the back of the remote and insert 2 x AAA batteries. Ensure the polarities are correct as shown in the
battery compartment. And that the batteries are all fresh batteries (batteries are not included).
-
The transmitter and receiver must be configured so that communication between each other is paired up.
This is achieved by setting the DIP switch on the receiver and transmitter on the same setting.
2 | P a g e
Receiver (controller) Transmitter (remote)