Changing The Preheat Temperature; Reduced Mode - VENTILAIRSEC VMI PUREVENT Manual De Uso

Status information
Levels 1
New filter
Filter
Batteries flat
Batteries
No
communication
Network

Changing the preheat temperature

GOAL: Changing the intake air temperature or disabling this feature.
1- Go to the SETTINGS menu.
2- Move the dial to select the desired temperature from the available values.
3- Press the button to confirm. To disable preheating, select the
4- The temperature will stop flashing to confirm that it has been accepted by the VMI®. If
the latter is not the temperature selected, it means that the management unit has
ignored the command. The operation will need to be repeated.
SETTINGS

Reduced Mode

Reduced mode is a safety mode of the VMI® PUREVENT VISION'R.
When Reduced mode is enabled,
The machine switches into Reduced mode if:
• One or more failures are critical for the machine,
• The outside air temperature is far too high to draw outdoor air into the house at
normal speed.
In these cases, the air renewal rate is minimised.
2 3
Turn the
dial
is shown on the control unit display.
4 5
SELECT THE
TEMPERATURE
6
Filter full
New batteries
Excellent
communication
pictogram.
Press the
button
19