Maintenance Of The Vmi® Purevent Vision'R Unit; Changing The Filter - VENTILAIRSEC VMI PUREVENT Manual De Uso

Maintenance of the VMI® PUREVENT VISION'R UNIT

Changing the filter

Operation that can be done by the user. However, you are advised to get it done by a professional.
Watch our video on our website.
The VMI® PUREVENT VISION'R unit is either equipped with:
- a pollen filter (G4),
- a fine particle filter (F7) or
- an odour filter (F7 with active carbon).
Some installations have two filters.
To ensure optimum air quality and correct functioning of the VMI® unit, the filter must be changed
regularly.
Changing the filter
▪
Order a new filter preferably from the installer or otherwise from Ventilairsec.
▪
Cut all power to the VMI® unit.
▪
Access the VMI® unit.
▪
Remove the blue hatch.
▪
Remove the old filter. (The filter is non-recyclable.)
WARNING: Do not insert anything in the machine apart from the new filter.
▪
Insert the new filter. The printed face of the filter should remain visible.
▪
Put the blue hatch back in place.
▪
Switch on the power supply for the VMI® unit.
▪
Reset the filter counter on the control unit.
WARNING: When changing the filter, only the blue hatch must be removed. You may get an electric
shock, get burnt or cut yourself if you open the housing.
Procedure for confirming the filter replacement on the control unit:
1. Open the SETTINGS menu.
2. Select the filter pictogram using the dial.
3. Confirm by holding down the button for 3 seconds.
4. The filter pictogram will flash, press the button to confirm the operation.
SETTINGS
Turn the
dial.
SELECT THE
FILTER
PICTOGRAM
Hold down
the button
for 3
seconds
20