Disc Operations; Playing A Disc In The Receiver - JVC KD-ADV6160 Manual De Instrucciones

Disc operations

The disc type is automatically detected, and
playback starts automatically (for DVD:
automatic start depends on its internal program).
If the current disc is an audio CD, CD Text,
MP3/WMA, or VCD without PBC, all tracks
will be played repeatedly until you change the
source or eject the disc.
• If a title list or disc menu appears while
playing a DVD or VCD with PBC, see "Disc
menu operations" on page 20.
The following marks are used to indicate
the playable discs....
DVD Video
Video CD with/without
PBC
MP3/WMA disc

Playing a disc in the receiver

Video CD with PBC
only
Audio CD/
CD Text
All discs listed here
Before performing any operations, make
sure the following....
• Turn on the monitor for playing a DVD or
VCD. If you turn on the monitor, you can also
control the audio CD, CD Text, and MP3/
WMA playback by referring to the monitor
screen. (See pages 24 and 25.)
• For DVD playback, you can change the Setup
Menu setting to your preference. (See pages
26 – 28.)
• The operations explained on pages 17 – 28 are
using the remote controller.
• When you want to operate the DVD/CD
player using the buttons on the control panel,
see "Other disc operations" on pages 29 – 31.
If " " appears on the monitor when
pressing a button, the receiver cannot accept
an operation you have tried to do.
• In some cases, without showing "
operations will not be accepted.
• Microsoft and Windows Media are either
registered trademarks or trademarks of
Microsoft Corporation in the United States
and/or other countries.
,"
To be continued....
15