Sharp LL-T1610W Manual De Funcionamiento página 22

Adjusting the screen display (when using an analog signal)
MODE SELECT Menu
Notes:
• Depending on the resolution of the input signal, even
if menu options can be selected, the display may not
change.
• To choose a menu option:
• When adjustment complete:
OSD H-POSITION (OSD horizontal position)
The position of the OSD display can be moved to the left
and right. (
OSD V-POSITION (OSD vertical position)
The position of the OSD display can be moved up and
down. ( buttons)
INPUT (Input mode)
The input mode can be set. (
VESA: VESA mode
MAC: Power Macintosh mode
400 LINES (degree of resolution)
You can specify the horizontal resolution of a 400-line
screen when using US text, etc.
( buttons)
640: 640 X 400 dot mode
720: 720 X 400 dot mode (US text etc.)
Note:
• As the resolution input for other than 400 lines is
done automatically, there is no need to set it.
EXPAND (Screen expansion)
For display modes of less than 1280 X 1024 pixels, the
display can be expanded if desired. (
OFF: Expansion off
ON1: Using the fixed aspect ratio,
the entire screen is enlarged.
ON2: The entire screen is enlarged.
Note:
• If a resolution of 1280 X 1024 pixels cannot be
achieved even after expansion is attempted, the
screen's perimeter will display black. (This is not a
malfunction.)
Downloaded from: http://www.usersmanualguide.com/
SELECT button
MENU button
buttons)
buttons)
buttons)
SCALING (Level of scaling)
If [EXPAND] is set on [ON1] or [ON2], the sharpness of
the image can be adjusted. (
Note:
• If [EXPAND] is set on [OFF], [SCALING] cannot be
adjusted.
COLOR MODE
If this is set on [OFF], the original color scheme of the
LCD monitor will be displayed. If this is set on [ON], the
colors of will be corrected according to the computer
image. ( buttons)
Note:
• To set [COLOR MODE] to [ON], set the [WHITE
BALANCE] to [STD].
22
buttons)