WMF SKYLINE Instrucciones De Uso página 7

▪ The mains cable should be removed:
⋅ in the event of malfunction during operation
⋅ prior to every clean
⋅ after use.
▪ Do not immerse the device in water.
▪ No liability is assumed for possible damage through
misappropriation, incorrect operation or negligent repair.
Furthermore warranty payments are excluded in such events.
▪ The device is not suitable for commercial use.
▪ If the cable of the device is damaged, it must be replaced by the
manufacturer's central customer services centre or a similarly
qualified person. Improper repair may cause considerable hazard to
the user.
Assembly
1 - Rubber cap for collection container
1
2 - Bean hopper cap
3 - Bean hopper
2
4 - Grinding scale
5 - Dose selector switch
3
6 - Start/stop button
4
7 - Collection container
8 - Mill ring
5
9 - Cleaning brush
6
Degree of fineness
You can achieve the desired fineness by turning the bean hopper (3).
7
We recommend the following settings for selecting the degree of
fineness:
1 - 3 for espresso and sieve carrier machines
3 - 7 for filter coffee machines
7 - 12 for manual brewing
The setting should be selected before coffee beans are added because
8
beans stuck in the mill may impede the motor.
Important: If you have already added the beans, only change the
degree of fineness while the mill is running.
During milling the setting may be changed at any time while the
motor is running.
Start-up
9
Clean the bean hopper cap (2), bean hopper (3), collection container
(7) and mill ring (8) prior to first use and dry well. Connect the mains
cable to a plug socket. Then place the bean hopper (3) on the device,
fill it and cover with the bean hopper cap (2).
Warning! This coffee mill is only suitable for milling coffee and
espresso beans. Using other grist such as poppy seed, nuts, sugar etc.
is considered inappropriate use and will result in your guarantee being
voided.
Select the required portion quantity on the portion selector switch (5).
7