Operating The Machine - WMF LONO Instrucciones De Uso

▪ The mains plug is to be pulled:
⋅ if malfunctions occur during use,
⋅ before cleaning and care,
⋅ after use.
▪ No liability is accepted for any damages resulting from misuse, incorrect operation or improper
repairs.
Claims under warranty are likewise excluded in such cases.
▪ Packaging material, such as plastic film bags, do not belong in the hands of children.
Operating the appliance for the first time and general information
The kettle is made from stainless steel and original Schott DURAN® glass. It is heat resistant, stable,
neutral tasting and easy to clean.
Thoroughly clean the inside of the kettle prior to the first use. (see the chapter entitled "Cleaning and
care").
A strainer insert in the pour spout ensures that larger limescale particles are kept back when pouring.
The unnecessary length of the connecting cable can be wound at the bottom of the base part.
Connect the mains plug to an earthed socket.
When filling the kettle, note the MIN (0.5 l) and MAX (1.4 l or 1.7 l) fill quantities.
Note: If you use too little water, the dry-run protection (overheating protection)
automatically switches the heating element off. If there is too much water then hot water may boil
over, which can cause serious injury or burns.
Depending on use, place one of the two lids on the kettle in order for the automatic BoilStop function
to work reliably. Place the kettle on the base in any position.
Do not use the water from the first boiling process for food preparation.

Operating the machine

You can prepare perfect cups of tea with the LONO 2-in-1 tea and water kettle by individually
selecting the temperature and brewing time. Alternatively you can use the appliance as a kettle as
well. It also offers additional functions such as keep warm and boil. The various options are explained
in detail below.
The temperature of the water and the length of time you leave the tea to infuse plays a key role in
making tea. Below you will find an overview to act as a guide: The temperature and infusion time can
be adapted depending on the type of tea and your personal preferences.
Temperature Type of tea
Japanese green tea
60°C
White tea
70°C
Yellow tea
Green tea
80°C
Oolong tea
Black tea
90-100°C
Herbal tea, fruit tea
14
Infusion time
3-4 mins.
3-4 mins.
1-3 mins.
3-4 mins.
1-2 mins.
3-4 mins.
5-8 mins.
Preparing tea
1. Remove the kettle from the base.
2. Use the lid with tea strainer (1).
3. Fill the tea strainer with the desired tea leaves. To do this, pull the tea strainer downwards to
remove it from the holder (Fig. A).
4. Push the tea strainer back into the holder until you hear it click into place (Fig. B).
5. Fill the kettle with the required amount of water (MIN 0.5 l, MAX 1.4 l)
6. Place the lid with tea strainer on the kettle. Make sure that the tea strainer is fitted to the lid. To
do this, pull the tea strainer upwards via the grip on the guide rod (Fig. C).The sieve is held in place
by means of a magnet on the lid.
7. Put the kettle on the base in any position.
8. To activate the kettle, press the desired temperature/programme button (70°, 80°, 90°,100°C or „p").
The preset brewing time is indicated on the display. You can adjust the brewing time individually;
see the section, „Setting the brewing time".
Alternatively, you can switch the kettle on by pressing the Start/Stop button. The temperature/
programme button (70°, 80°, 90°,100°C or „p") that was last used is displayed.
Note:If no key is pressed for 10 seconds, the kettle automatically switches itself off. The indicator
lights go out.
9. Press the Start/Stop button (11) to start heating. The Start/Stop button (11) and the selected
temperature button light up. You can interrupt the heating process at any time by pressing the
Start/Stop button (11) or by removing the kettle from the base.
10. As soon as the desired temperature has been reached, the appliance beeps (several times at specific
intervals). The brewing time on the display and the Start/Stop button flash.
11. Push the grip (2) on the tea strainer downwards as far as it will go. The tea is now in the water and
its full flavour can develop (Fig. D).
12. Start the timer for the set brewing time by pressing the Start/Stop button. The remaining brewing
time is indicated on the display.
Note:The appliance turns off automatically after around 10 minutes without the need to press the
Start/Stop button. The indicator lights go out.
13. Once the brewing time has passed, the appliance beeps (several times at specific intervals). The
appliance then switches off automatically. You can also switch off the appliance by removing it
from the base or by pressing the Start/Stop button.
14. Now pull the grip on the tea strainer upwards until it reaches the lid. The tea is now ready to be
enjoyed.
Note: Alternatively you can also place the sealed lid on the kettle to pour out the tea.
Boiling water
1. Remove the kettle from the base.
2. Use the sealed lid (12).
3. Fill the kettle with the required amount of water (MIN 0.5 l, MAX 1.7l).
4. Place the lid on the kettle.
5. Put the kettle on the base in any position.
6. To activate the kettle, press the desired temperature/programme button (70°, 80°, 90°,100°C or „p").
The brewing time indicated on the display can be set to 00:00 if required (see the section, „Setting
the brewing time").
Alternatively, you can also switch the kettle on by pressing the Start/Stop button. The temperature/
programme button (70°, 80°, 90°,100°C or „p") that was last used is displayed.
Note: If no key is pressed for 10 seconds, the kettle automatically switches itself off. The indicator
lights go out.
15