Specifications - Monitor Audio CUSTOM SUBWOOFER Serie Manual Del Propietário

Specifications

System Format
Low Frequency Limit
Amplifier Power Output
Amplifier Classification
Inputs
EQ Profiles
Phase Control
Auto Sensing
Auto Standby
Driver Compliment
Input Impedance
Mains Input Voltage
Dimensions (H x W x D)
(Inc fitted feet)
12v Trigger Input
Power Consumption
Weight (unpacked)
Monitor Audio reserves the right to alter specifications without notice.
CW8
Active sub-woofer system – twin ABR.
18mm MDF cabinet (CARB2 approved)
35Hz (-6dB)
350W RMS @ < 1% THD+N
Class D amplifier with Switch mode power supply (SMPSU)
Auto wireless audio input signal detection
After approximately 15 minutes if no signal sensed
Wireless audio source turned off
1 x 8" (200mm) C-CAM
® long throw driver.
2 x 8" (200mm) ABR
110 - 120 Vac / 220 - 240 Vac 50/60Hz
270 x 260 x 276mm
10 5/8 x 10 1/4 x 10 7/8"
5 - 12v via 3.5mm mono mini-jack socket
Standby: < 0.5W (ErP approved)
9.52Kg
21lb
monitoraudio.com
400W RMS @ < 1% THD+N
Stereo RCA
LFE (RCA)
LFE Balanced (XLR)
Flat/ Music/ Movie/ Impact
0 & 180 degrees
LFE Input <2mV
1 x 10" (250mm) C-CAM
2 x 10" (250mm) ABR
> 20K Ohms
(Manual Switch selection)
315 x 305 x 320mm
12 3/8 x 12 x 12 5/8"
Typical Idle: < 10W
Max Rated: 400W
CW10
32Hz (-6dB)
® long throw driver.
12.64Kg
27lb 12oz
9