Using Your Steam Inhaler Hot Steam Inhalation Therapy - Veridian Healthcare 11-525 Manual De Instrucciones

USING YOUR STEAM INHALER
HOT STEAM INHALATION THERAPY
Before proceeding, the individual receiving therapy
should be seated in a comfortable position as
treatments take several minutes. Keep in mind the
height of the user and of the product to ensure the
mask is at the desired level; the steam inhaler should
never be lifted or handled while operating.
STEAM THERAPY TREATMENTS
1. The unit should be situated on a flat, stable
surface within operating range of the user and an
electrical outlet. Ensure that the air vents on the
side of the unit housing are not blocked or
obstructed.
2. Remove the top cover of the housing by pressing
the ridged area on the underside of the
extension tube and pulling up on the top cover,
Fig. 1.
3. Open the water heater tank by turning the cover
counter-clockwise, Fig. 2.
4. Using the included measuring cup, add 20 ml of
pure tap or distilled water to the water heater
tank, Fig. 3. Note the fill line in the tank. Do not
overfill. Never add saline, essential oils or other
additives to the heating tank as this will damage
the unit.
5. Replace the water tank cover and close
securely by turning clockwise.
8 • ENGLISH
Fig. 1
Fig. 2
Fig. 3