Bass Management System); B.M.S. Frequency Offset; Crsc (Clean Reception System Circuit); Amp Control - Kenwood KTS-MP400MR Manual De Instrucciones

B.M.S. (Bass Management System)
Adjust the bass boost level of the external
amplifier using the main unit.
Display Setting
"AMP Bass FLT" Bass boost level is flat.
"AMP Bass +6" Bass boost level is low (+6dB).
"AMP Bass +12" Bass boost level is mid (+12dB).
"AMP Bass +18" Bass boost level is high (+18dB).
• Refer to the catalog or instruction manual for power
amplifiers that can be controlled from this unit.
• For amplifiers there are the model that can be set
from Flat to +18 dB, and the model that can be set
from Flat to +12 dB.
When an amplifier that can only be set to +12 is
connected to the unit, "AMP Bass +18" won't work
correctly even if it's selected.

B.M.S. Frequency Offset

Setting the central frequency boosted by B.M.S.
Display Setting
"AMP Freq NML" Boost with the normal central frequency.
"AMP Freq Low" Drop the normal central frequency 20%.
In FM reception
CRSC (Clean Reception System
Circuit)
Temporarily have reception switched from
stereo to mono to reduce multi-path noise when
listening to the FM station.
Display
"CRSC ON"
"CRSC OFF"
• Strong electrical fields (such as from power lines) may
cause unstable sound quality when CRSC is turned
ON. In such a situation, turn it OFF.
When LX AMP unit connecting

AMP Control

You can control the LX AMP connected to the
unit.
1
Select AMP Control mode
Press the [FM] or [AM] button.
Select the "AMP Control" display.
2
Enter AMP Control mode
Press the [4] or [¢] button for at least 1
second.
3
Select the AMP Control item for adjustment
Press the [FM] or [AM] button.
• For the details of the AMP Control item, see the
Instruction manual attached to the LX AMP.
4
Adjust the AMP Control item
Press the [4] or [¢] button.
5
Exit AMP Control mode
Press the [MENU] button.
Setting
The CRSC is ON.
The CRSC is OFF.
|
25
English