Connecting Wires To Terminals - Kenwood KTS-MP400MR Manual De Instrucciones

Connecting Wires to Terminals

KTS-MP400MR
A Rear output
B Front output
C Subwoofer output
Left output (White), Right output (Red)
To Wired remote controller
To Kenwood disc changer/
Sirius satellite radio tuner/
External optional accessory
To connect these leads, refer to
the relevant instruction manuals.
If no connections are made, do not let the wire come out
from the tab.
Connect either to the power control terminal when
using the optional power amplifier, or to the antenna
control terminal in the vessel.
Connect to the terminal that is grounded when either
the telephone rings or during conversation.
To "EXT.AMP.CONT. " terminal of the amplifier having the
external amp control function.
Do not let the wire come out from the tab.
Fuse box
(Main fuse)
Battery
|
30
English
KTS-300MR
–
Front output
Rear output/ Subwoofer output
Fuse (10A)
To light control switch
To front left speaker
To front right speaker
To rear left speaker
To rear right speaker
Ignition key
switch
A
B
Power control/Antenna control wire
(Blue/White)
TEL mute wire (Brown)
Dimmer control wire (Orange / White)
External amplifier control wire
(Pink/Black)
Not Used (Blue)
White/Black
White
Gray/Black
Gray
Green/Black
Green
Purple/Black
Purple
Fuse box
ACC
C
FM/AM antenna input
Wiring harness
(Accessory1)
Ignition wire (Red)
Battery wire (Yellow)
Ground wire (Black) -
(To a negative ground point of the vessel)