Loading The Multi-Block Holder - Amann Girrbach Ceramill motion Instrucciones De Uso

▷ Depending on your selection in the CAM soft-
ware, insert up to three blanks into the blank
holder for glass ceramic blanks with the groove
facing frontward, and secure them with the
Allen key.
Fig. 2
4.2

Loading the multi-block holder

The blank holder can also be inserted into
the milling machine before loading it (see
page 14).
▷ Insert the standard tools into the multi-block
holder. Position the tool shank facing toward
the outside.
▪ Set 1.8 cutter to position 1.
▪ Set 1.4 cutter to position 2.
▪ Set 1.0 cutter to position 3.
▪ Set 0.4 cutter to position 4.
A P P L I C A T I O N
Fig. 3
▷ Optional: Insert the sister grinding tools into the
multi-block holder. Position the tool shank fac-
ing toward the outside.
▪ Set 1.8 cutter to position 6.
▪ Set 1.4 cutter to position 7.
▪ Set 1.0 cutter to position 8.
▪ Set 0.4 cutter to position 9.
▷ Depending on your selection in the CAM soft-
ware, insert up to 12 blanks into the multi-block
holder with the groove facing frontward, and
secure them with the Allen screws.
Fig. 4
E N
11