Select The Number Of Tests To Average; Select A Different Language; Select The Units To Display For Temperature - AgraTronix MT-PRO+ Manual Del Operador

SELECT THE NUMBER OF TESTS TO AVERAGE

1. The tester can automatically average 3, 6 or 9 tests. (default is 3)
2. To change the number of averages, while in the grain menu press the "UP
OR DOWN" buttons until "OPTIONS" is selected then press the "ENTER"
button.
3. The "OPTIONS" menu will now be displayed, press the "UP OR DOWN"
buttons until "# TO AVG" is selected then press the "ENTER" button.
4. The "# TO AVG" menu will be displayed press the "UP OR DOWN" buttons to
select the number of averages you would like the tester to perform.
5. Once you have selected the correct number to average press the "ENTER"
button the words "SAVING" and a moving gear will be displayed to confirm
that your selection has been saved.
6. If you don't want your selection to be saved simply press the "BACK
ARROW" button and you will be returned to the previous menu without
saving your selection.

SELECT A DIFFERENT LANGUAGE

1. To change languages, while in the grain menu press the "UP OR DOWN"
buttons until "OPTIONS" is selected then press the "ENTER" button.
2. The "OPTIONS" menu will now be displayed, press the "UP OR DOWN"
buttons until "LANGUAGE" is selected then press the "ENTER" button.
3. The "LANGUAGE" menu will then be displayed, press the "UP OR DOWN"
buttons to select the language you would like to use.
4. Once you have selected the correct language press the "ENTER" button the
words "SAVING" and a moving gear will be displayed to confirm that your
selection has been saved.
5. If you don't want your selection to be saved simply press the "BACK
ARROW" button and you will be returned to the previous menu without
saving your selection.

SELECT THE UNITS TO DISPLAY FOR TEMPERATURE

1. The tester can display in either ºC or ºF.
2. To change the temperature units, while in the grain menu press the "UP OR
DOWN" buttons until "OPTIONS" is selected then press the "ENTER" button.
3. The "OPTIONS" menu will now be displayed, press the "UP OR DOWN"
buttons until "TEMPERATURE" is selected then press the "ENTER" button.
4. The "TEMPERATURE" menu will then be displayed, press the "UP OR
DOWN" buttons to select the temperature units you would like to use.
5. Once you have selected the correct temperature unit press the "ENTER"
button the words "SAVING" and a moving gear will be displayed to confirm
that your selection has been saved.
6. If you don't want your selection to be saved simply press the "BACK
ARROW" button and you will be returned to the previous menu without
saving your selection.
Operation
10-8