Select A Different Font Size; Adjusting The Contrast On The Display - AgraTronix MT-PRO+ Manual Del Operador

SELECT A DIFFERENT FONT SIZE

1. The tester has two different font sizes: standard and large to allow for easier
viewing.
2. To select the font size while in the grain menu press the "UP OR DOWN"
buttons until "OPTIONS" is selected then press the "ENTER" button.
3. The "OPTIONS" menu will now be displayed, press the "UP OR DOWN"
buttons until "FONT SIZE" is selected then press the "ENTER" button.
4. The "FONT SIZE" menu will then be displayed, press the "UP OR DOWN"
buttons to select either standard or large.
5. Once you have selected the correct setting press the "ENTER" button the
words "SAVING" and a moving gear will be displayed to confirm that your
selection has been saved.
6. If you don't want your selection to be saved simply press the "BACK
ARROW" button and you will be returned to the previous menu without
saving your selection.

ADJUSTING THE CONTRAST ON THE DISPLAY

1. The tester's display contrast can be adjusted from 50% to 100%.
2. To adjust the tester's contrast, while in the grain menu press the "UP OR
DOWN" buttons until "OPTIONS" is selected then press the "ENTER" button.
3. The "OPTIONS" menu will now be displayed, press the "UP OR DOWN"
buttons until "CONTRAST" is selected then press the "ENTER" button.
4. The "CONTRAST" menu will be displayed press the "UP OR DOWN" buttons
to adjust the contrast percentage.
5. Once you have adjusted the contrast press the "ENTER" button the
words "SAVING" and a moving gear will be displayed to confirm that your
adjustment has been saved.
6. If you don't want your selection to be saved simply press the "BACK
ARROW" button and you will be returned to the previous menu without
saving your selection.
Operation
10-10