6
C
HANGING BATTERIES
The scales requires 4 1.5 V AA mignon batter-
ies.
If the 'change battery' symbol Bat appears, the
battery is almost flat.
Insert the batteries into the battery compartment
beneath the scales. Make absolutely sure that
you insert them with the correct polarity as
marked.
7
C
LEANING AND MAINTENANCE
The stainless steel surface of the scales has an
anti-fingerprint coating to prevent soiling.
You can clean the scales including the glass
weigh plate with a damp cloth, using a little
washing-up liquid if necessary.
Clean the weigh plate
surface regularly.
8
I
N THE EVENT OF PROBLEMS
Display
E- - - -
- - - -
Cause
The weighing range of 5000 g has been
exceeded.
The maximum memory of at least one of
the nutritional or energy values has been
exceeded, e.g. over 99999 kJ.
There is no nutritional or energy value for
this foodstuff that has been requested.
0 is added in memory mode.
Note
• When the batteries are changed, the
stored results are retained.When the bat-
teries are changed, the stored results are
retained.
• Do not use rechargeable batteries.
• You should preferably use
batteries with are free of
heavy metal. You can rec-
ognise batteries containing
heavy metal by the follow-
ing symbols:
Pb = Battery contains lead
Cd = Battery contains cadmium
Hg = Battery contains mercury
Note
The weigh plate is permanently se-
cured to the scales and cannot be
detached.
In the course of time, dust
or dirt may gather on the
weigh plate. Clean the
space between by pulling
the cloth beneath the
weigh plate.
28
Remedy
Remove the item to be
weighed from the weigh
plate.
Clear the memory with
memory button MC.